*Please call us for current repair rates and time estimates.
Electric Set Up- remove strings, clean and oil fingerboard, polish frets, clean body, check tuning keys, nut, bridge, tailpiece and electronics, re-string, adjust truss rod, balance tremolo, set action, set intonation, adjust pickups, match saddle radius to neck radius, lube where applicable, and test play.
Tremolo Adjustment- Adjust tension & balance tremolo left to right & front to back.
Bridge Adjustment- Adjust saddle height and intonation.
Acoustic Set Up- remove strings, clean and oil fingerboard, polish frets, clean body, check tuning keys, nut, bridge, tailpiece and electronics (if applicable), re-string, adjust truss rod, adjust pickups (if applicable), match saddle radius to neck radius, lube where applicable, and test play.
Truss Adjust – Straighten Fingerboard/Correct Relief.
Install Strap Button – With Felt Pad.
Machine Head Adjustment – Adjust Tension on Tuning Machines & Lubricate Gears (If Necessary).
Action Adjustment - Acoustic/Electric – Set String Height At Nut & Saddle.
Replace Pickguard – (Stock) Replace or install aftermarket pickguard.
Machine Head Replacement -Replace Tuning Machines, Fill Old Screw Holes & Re-Route Tuning Peg Holes.
Replace Selector Switch
Run Tailpiece Ground On Solid Body
Install Mini Toggle Or Push/Pull Pot
Install Output Jack
Install Pre-amp (Pre-amp Not Included).
Complete Rewire – Standard Wiring & Custom Wiring.
Hum & Electrostatic Shielding
Spray Electronics – Clean & Lube Noisy Pots.
Transducer Installation – Saddle Type – Microphone (Miniflex) – Soundhole W/ Endpin Jack
Replace With Bone & Blank
Replace Compensating Saddle (Bone)
Fill & Re-Cut Saddle Slot
Replace With Bone Blank – 6 string/12 string.
Replace With Brass
Fill & Re-Cut Nut Slots
Install Locking Nut – Wilkinson Roller Nut.